Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Chatsworth, CA
Gate installation in Chatsworth isn’t a one-size-fits-all job. The low-density, semi-rural character of this corner of the San Fernando Valley means we’re usually working on long, heavy driveway gates built for horse trailers and ranch vehicles, not small courtyard pedestrian gates. Chatsworth’s mix of 1950s-70s ranch homes and custom ranchettes on oversized lots means gates here are wider, heavier, and asked to cycle more often than almost anywhere else in the Valley. If you need a gate built, repaired, or automated in Chatsworth, call (844) 655-9821 and we’ll talk through what your property actually needs.
Why Chatsworth Homes Are Different
Chatsworth sits at the hot, dry western edge of the San Fernando Valley, pressed up against the Santa Susana Mountains. That positioning shapes every gate job we do here. Summer temperatures regularly push past 100 degrees for weeks at a time, and the seasonal Santa Ana winds blow fine dust and grit across the flatlands and up into the hillside lots. For gate hardware, that means operators run hot, solar panels lose efficiency in the heat, and dirt works its way into tracks, rollers, and hinge bearings faster than it does in the cooler, denser parts of the Valley.
The housing stock matters too. Chatsworth’s older ranch-style homes on large lots often have driveway gates that are 40 to 60 years old, built of heavy steel and set in concrete foundations that have shifted with decades of dry-season soil movement. The newer hillside estates off the canyons bring a different challenge: long, steep driveways where the gate is hundreds of feet from the street and the power run is a real engineering consideration. And the equestrian properties around the Chatsworth horse lots need gates that clear trailers, stay latched through wind, and keep operating through dust and daily use. A gate that only cycles ten times a day in a dense Valley neighborhood can cycle forty times a day on a horse property. That changes what wears out and how fast.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Chatsworth Services
The two calls we get most often from Chatsworth are for mechanical gate repair and electric gate repair, and each has its own dedicated page for this area. Here’s what you should know before you call.
Gate Repair in Chatsworth
Mechanical gate repair in Chatsworth usually means one of three things: a heavy swing gate that’s sagging or dragging, a slide gate that’s binding on its track, or a latch and hinge system that’s finally given out after years of wind and dust exposure. On Chatsworth’s equestrian properties, we see wide swing gates with worn hinge bearings and bent posts from wind loads against the gate face. On the flatland ranch homes, it’s more often slide gates with grit-packed rollers and worn track. We diagnose the actual failure, then repair or replace only what needs it. For the full breakdown of mechanical gate repair in this area, visit our Gate Repair in Chatsworth page.
Electric Gate Repair in Chatsworth
Electric gate failures in Chatsworth follow a pattern: heat-stressed control boards, motors that have overheated over a long summer, safety sensors misaligned or fouled with dust, and solar-charged systems that aren’t holding charge. On the remote hillside and equestrian lots where power runs are long, solar-assisted operators are common, and those need a technician who understands both the electrical and the mechanical side. We work on motors, boards, keypads, loops, and safety edges across residential and commercial systems. For the complete picture on electric gate service in this area, see our Electric Gate Repair in Chatsworth page.
Gate Installation in Chatsworth
Gate installation in Chatsworth means building something that survives this climate and serves this property. The heat, the Santa Ana winds, the dust, and the long driveways all shape what we recommend. Whether you’re replacing a failing gate on a 1950s ranch home or putting in a new automated system on a hillside estate, the job starts with a site assessment, not a catalog pick. We install swing and slide gates, build for the wide clearances that horse trailers and ranch vehicles need, and design the automation around real daily usage rather than theoretical cycles. This work is measured, specified, and scheduled, never rushed. Our Gate Installation service covers the full project from consultation to final programming.
Automatic Gate Installation
Signs you need it
You’re manually opening a wide driveway gate multiple times a day, or you’ve got a property where the gate is far from the house and manual operation is a real burden.
What it costs in Chatsworth
Automatic gate installation in Chatsworth typically runs $4,000 to $12,000 for a complete automated gate and operator, with the wide, heavy swing and slide gates common here landing at the mid-to-upper end of that range.
How we do it
We assess the gate weight, width, and cycle frequency, run or spec the power, mount the operator, install safety sensors and edges, and program the full system for your specific entry.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, bent from wind or an impact, or simply too narrow for a horse trailer, RV, or work truck you now need to get through.
What it costs in Chatsworth
Driveway gate installation in Chatsworth runs from $3,500 to $8,000 for a quality steel gate set in concrete with proper hinges, posts, and hardware built for the wide driveways and heavy cycles common here.
How we do it
We measure the driveway width and slope, fabricate or order a gate sized for your actual vehicles, set the posts in concrete, hang and align the gate, and weld or bolt hardware for long-term square and plumb operation.
Sliding Gate Installation
Signs you need it
Your driveway slopes up from the street or you don’t have room for a gate to swing open, which makes a sliding configuration the practical choice on many Chatsworth hillside and compact-front lots.
What it costs in Chatsworth
Sliding gate installation in Chatsworth runs $4,000 to $9,000 depending on gate length, track type, and whether an electric operator is included in the job.
How we do it
We set the track or cantilever system, size the gate for the opening plus overhang, install the roller hardware and guides, then hang and adjust until the gate runs square without binding.
What Gate Installation Costs in Chatsworth
| Item | Typical range in Chatsworth |
|---|---|
| New driveway gate, installed with posts and hardware | $3,500 – $8,000 |
| Automatic gate system with operator, installed | $4,000 – $12,000 |
| Sliding gate, installed | $4,000 – $9,000 |
Can you install a gate that fits my horse trailer?
Yes. We routinely build driveways gates in Chatsworth with wide clearances, often 12 to 16 feet, to accommodate horse trailers and ranch vehicles. The gate is sized and hinged for the width you actually need, not a standard residential opening.
Do you handle the power run to the gate?
We handle the gate-side electrical and low-voltage work for operators, keypads, and safety sensors. For long power runs from the house or panel, we coordinate with a licensed electrician. Call (844) 655-9821 to discuss your site.
Brands We Service in Chatsworth
We work on Mighty Mule and Ghost Controls systems, which are common on Chatsworth’s residential and rural lots, and DoorKing and Elite, which show up on commercial and HOA properties. Parts for these brands are stocked locally, which keeps typical repairs moving without a week of waiting on a distributor. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Chatsworth, CA
| Service | Typical range in Chatsworth |
|---|---|
| Gate repair, general mechanical | $150 – $500 |
| Electric gate repair, motor or board | $250 – $900 |
| Automatic gate installation | $4,000 – $12,000 |
| Driveway gate installation | $3,500 – $8,000 |
| Sliding gate installation | $4,000 – $9,000 |
In Chatsworth, price is driven by gate width and weight, the condition of existing posts and track, and how far the gate sits from a power source. Whatever the job, the price is quoted and agreed before we start any work, so there’s no surprise on the invoice.
Neighborhoods We Serve in Chatsworth
We cover the full span of Chatsworth from the flatland ranch tracts to the hillside and canyon lots against the Santa Susanas. Response time is typically same day or next day for repair calls, with installation scheduled around your project.
- Chatsworth equestrian lots and horse-property areas
- Hillside estates along the Santa Susana foothills
- 1950s-70s ranch-style tracts in central Chatsworth
- Canyon and ridgeline properties on the west edge
- ZIP codes 91311 and 91313
Service Area – Cities Near Chatsworth
If your property sits near the Chatsworth line, we likely cover you as well. We serve Porter Ranch, CA to the north, Granada Hills, CA, Granada Hills North, CA, and Granada Hills South, CA to the east. Call us and we’ll confirm whether your address is in the service area.
Serving Chatsworth, CA – Our Local Coverage Area
We’re based in the Chatsworth area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Chatsworth
For a gate that’s stuck open, stuck shut, or won’t close, we aim for same-day or next-day service across Chatsworth and the West Valley. If your gate is a security concern, tell us when you call and we’ll prioritize it. Call (844) 655-9821.
Some Chatsworth neighborhoods, particularly the planned communities and newer hillside developments, have HOA design review requirements for gate style, height, and color. We’ll build to your HOA’s approved spec. Call (844) 655-9821 and we can talk through what your HOA will need.
Yes. We service commercial and HOA gate systems in Chatsworth, including multi-tenant access systems, loop detectors, keypads, and telephone entry. We handle both the mechanical gate and the access control side, so you’re not splitting the job between contractors.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What Chatsworth Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Stephanie Miller"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Yolanda Torres"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Emily Bennett