Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sylmar, CA
Gate installation in Sylmar means building for heat, wind, and long driveways. Most of the homes here are mid-century tract houses or larger horse-property lots with gates that have to hold up under Santa Ana winds and triple-digit summers. Gate Repair Valencia has served Sylmar since 2013, and we plan every install around what actually happens on a Sylmar lot: sun-warped posts, wind-fatigued welds, and gates wide enough for a trailer. Call (844) 655-9821 when you want a gate that stays square and cycles clean for years.
Why Sylmar Homes Are Different
Sylmar sits on the San Fernando Valley’s northern edge, right where the I-5 corridor funnels Santa Ana winds into the foothills. That wind is the dominant force in gate work here. Double gates sag. Cantilever frames twist. Operator arms bind against posts that moved half an inch in a hot summer. What looks like a simple alignment problem is usually structural fatigue from years of wind loading, and a fix that worked in a denser, cooler part of LA won’t survive a Sylmar September.
The housing stock compounds it. A mid-century tract home in 91342 might have an original tubular steel gate from the 1960s, built long before today’s safety edge and photo eye standards. A horse property off Foothill Boulevard in 91392 might have a 14-foot custom gate on worn rollers, with swing clearances no residential kit is designed for. Summer days routinely pass 100°F, and the heat cycles weaken powder coat, dry out gate openers, and amplify any existing bind in the track. We account for all of it when we quote.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Sylmar Services
Two calls dominate our Sylmar schedule: gates that won’t open or close, and gates that need to be replaced outright. Both are covered below, each with its own dedicated Sylmar page.
Gate Repair in Sylmar
Most Sylmar repair calls are wind-related: a double gate that won’t meet in the middle, a slide gate grinding on a bent track, or a hinge torn loose from a leaning post. We diagnose the full system, not just the part that failed, because a sagging leaf usually means something upstream shifted. If you’re in the 91342 or 91392 ZIP and your gate is fighting you, start with the repair page for the local breakdown. Gate Repair in Sylmar
Electric Gate Repair in Sylmar
When an operator hums but nothing moves, or a gate reverses for no reason, the problem is usually electrical: a control board, a limit switch, a failing capacitor, or a sensor circuit taking heat-related readings. Our technicians work on motors and control boards daily, across residential and commercial systems. Sylmar’s heat stress makes electrical connections fail faster than the coast, so we test components under load, not just on the bench. Electric Gate Repair in Sylmar
Gate Installation in Sylmar
Gate installation in Sylmar starts with the site: slope, soil, wind exposure, and what the gate actually has to do. A decorative driveway gate on a flat 91342 lot is a different job than a 16-foot farm gate on a 91392 horse property with a steep apron and no poured pad. We spec the gate, the operator, and the hardware for the conditions, not for a catalog photo. As a full-service installer, we handle the concrete work, the steel or aluminum assembly, the operator mounting, and the safety wiring as one cohesive job. If you’re planning a replacement or building new, the Gate Installation process starts with a free site measure and a written quote.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open a gate by hand, or you’ve added tenants, horses, or equipment that make manual operation unsafe or impractical.
What it costs in Sylmar
Automatic gate installation in Sylmar typically runs $3,500 to $18,000 depending on gate size, operator duty cycle, and whether new power has to be trenched from the house.
How we do it
We measure the opening, check soil and slope, set the posts or pour the pad, mount the operator, run power and low-voltage wiring, install photo eyes and safety edges, and program the full open/close cycle before we leave.
Driveway Gate Installation
Signs you need it
Your existing gate is structurally sagging, the posts have moved, or a new gate is required because the old one doesn’t meet current safety requirements for vehicle detection and reversing.
What it costs in Sylmar
A single driveway gate in Sylmar generally falls between $2,500 and $10,000 before an operator is added, with the wide horse-property gates in 91392 landing at the top of that range.
How we do it
We remove the old gate, inspect and reuse or replace the posts, hang the new gate with adjustable hinges, and set the clearances for the grade so it swings freely without dragging on the high side of the driveway.
Sliding Gate Installation
Signs you need it
Your lot slopes up from the street, or your driveway opening is too wide for a swing gate, or a cantilever slide is the only design that survives the Santa Ana wind season without sagging.
What it costs in Sylmar
Sliding gate installation in Sylmar typically starts around $3,000 and reaches $18,000 for commercial-grade cantilever systems with operators and vehicle loops.
How we do it
We set the track or cantilever posts, pour the concrete supports, hang and level the gate, mount the rack and operator, then test the full travel under load and adjust the stops.
What Gate Installation Costs in Sylmar
| Item | Typical range in Sylmar |
|---|---|
| Manual driveway gate, steel or aluminum | $2,500 – $10,000 |
| Automatic gate with operator and safety package | $3,500 – $18,000 |
| Slide or cantilever gate with welded frame | $3,000 – $18,000 |
Wind exposure and gate width are the two biggest price drivers in Sylmar. A 16-foot ranch gate needs heavier steel and a stronger operator than a 10-foot tract-home gate, and the price reflects that. Every quote is written, line-itemed, and agreed before any work starts.
Do you handle permits for gate installation in Sylmar?
Most residential gate replacements in Sylmar don’t need a permit, but new block walls, driveway widening, or electrical trenching sometimes do. We’ll tell you before quoting if your job crosses that line.
Can you install a gate on a Sylmar horse property?
Yes. We regularly install wide rural-access gates in 91392 with operator packages sized for frequent duty cycles and wind loading. Call (844) 655-9821 for a free on-site measure and written estimate.
Brands We Service in Sylmar
We repair and install gate systems from Ghost Controls, Mighty Mule, DoorKing, and Elite, among others, and we keep the most common replacement parts for those brands in local stock. That means a failed Mighty Mule control board or a DoorKing limit switch doesn’t idle for a week waiting on a distributor. Check our brands to see the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sylmar, CA
| Service | Typical range in Sylmar |
|---|---|
| Gate repair, manual steel or aluminum | $175 – $700 |
| Automatic gate repair, operator or control board | $250 – $1,200 |
| Gate opener replacement | $450 – $1,500 |
| Manual driveway gate installation | $2,500 – $10,000 |
| Automatic gate installation | $3,500 – $18,000 |
| Sliding gate installation | $3,000 – $18,000 |
| Service call, diagnosis only | $75 – $125 |
| Full system maintenance, residential | $150 – $400 |
In Sylmar, the heat and wind push repair prices toward the top of these ranges because failures are often frame-level rather than a single hinge or wheel. You’ll always get the number in writing before we start, and the price we quote is the price you pay.
Neighborhoods We Serve in Sylmar
We run calls across the full Sylmar footprint, from the tract-home streets near Hubbard and Glenoaks to the ranch roads climbing toward the foothills. We know which neighborhoods have original mid-century gates, which have newer HOA-standard steel, and which driveways are steep enough to require a slide rather than a swing.
- Hubbard Corridor
- Foothill Trails
- Casa Grande Estates
- Rancho Cascades
- Sylmar Northeast horse properties
Most Sylmar jobs can be scheduled within a few business days, and we keep parts for the common brands on hand to avoid a second trip.
Service Area – Cities Near Sylmar
Gate Repair Valencia runs service across the northern San Fernando Valley. If you’re just over the border, we cover San Fernando, CA directly south, Granada Hills North, CA to the southwest, Granada Hills South, CA further into the valley, and Granada Hills, CA proper. One dispatch team, one phone number.
Serving Sylmar, CA – Our Local Coverage Area
We’re based in the Sylmar area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sylmar
Most Sylmar repair calls are scheduled within a few business days, and we prioritize non-working security gates. Call (844) 655-9821 and we’ll give you a real scheduling window, not a vague promise.
Some do, especially in the newer developments around 91342. If you’re in an HOA, check your CC&Rs before picking a gate design. We can match the existing ironwork and finish so the gate fits the street’s look.
Yes. We cover both Sylmar ZIP codes, 91342 and 91392, including the horse properties along the foothill roads where gates are larger and hardware gets worked harder.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What Sylmar Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Megan Fletcher"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Rafael Garcia"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Ruben Martinez